Investment casting plugs can be manufactured in different grades of ceramic material. For instance, where a very smooth, clean finish is required, then typically a 95% alumina is used (99% alumina also available). buff.ly/2QAccXRpic.twitter.com/4lZ9eGnvps
IPS Ceramics offer an enhanced range of 99% alumina tubes these can be cut to your length requirement. We also offer a full range of longer tubes and different diameters on a special-order basis. For more info have a look at our shop buff.ly/2DXPjZVpic.twitter.com/EdGqReS0xj
Ignition trays are used in a wide variety of industrial processes and tests. We typically offer trays in 95% alumina which is suitable for most applications. Sizes up to 20cm long and 2cm deep are typical. buff.ly/2QAccXRpic.twitter.com/tPbqwnTGgQ
Alumina tubes and rods are found across numerous user industries as a cost-effective yet high-performance solution. The combination of key properties makes them a go-to product in many instances. buff.ly/2CL16LSpic.twitter.com/O6Mxtm1X9e
Many of our technical ceramics (such as alumina, zirconia, etc.) are very difficult to machine due to their very high hardness and abrasion resistance. However, IPS Ceramics can now offer a water jet or laser cutting service for flat tiles or substrates. buff.ly/2VS3Nl3pic.twitter.com/mDG4RZo9nK